【51单片机快速入门指南】4.3.2： MPU6050：一阶互补滤波、二阶互补滤波和卡尔曼滤波获取欧拉角

Others 2021-11-26 11:47:07 views: null

目录

普中51-单核-A2
STC89C52
Keil uVision V5.29.0.0
PK51 Prof.Developers Kit Version:9.60.0.0
上位机：Vofa+ 1.3.10

参考资料：
MPU6050数据采集及其意义和滤波（一阶互补滤波、二阶互补滤波、卡尔曼滤波）—— 275891381
关于MPU6050姿态解算的一阶互补滤波方法（从原理到代码实现） —— 可以叫我马同学
姿态融合的一阶互补滤波、二阶互补滤波、卡尔曼滤波核心程序 —— 卖硬件的

源码

       stdint.h见【51单片机快速入门指南】1：基础知识和工程创建
       软件I2C程序见【51单片机快速入门指南】4： 软件 I2C
       串口部分见【51单片机快速入门指南】3.3：USART 串口通信
       MPU6050.c、MPU6050.h见【51单片机快速入门指南】4.3： I2C读取MPU6050陀螺仪的原始数据

MPU6050_Filter.c

#include "MPU6050.h"
#include <math.h>
#include "./MPU6050/MPU6050_Filter.h"

#define PI 3.141592653589793

float Delta_t = 1;
float GYRO_K = 1;

#define First_Order_Filter_Tau 0.075
float First_Order_k = 1;

void MPU6050_Filter_Init(float loop_ms)
{
    
    
	Delta_t = loop_ms/1000.;
	First_Order_k = First_Order_Filter_Tau / (First_Order_Filter_Tau + Delta_t);
	switch((MPU_Read_Byte(MPU_GYRO_CFG_REG) >> 3) & 3)
	{
    
    
		case 0:
			GYRO_K = 131;
			break;
		case 1:
			GYRO_K = 65.5;
			break;
		case 2:
			GYRO_K = 32.8;
			break;
		case 3:
			GYRO_K = 16.4;
			break;
	}
}

float First_Order_Filter_Calc(int16_t acc1, int16_t acc3, int16_t gyro2, float * angle2)
{
    
    
	*angle2 = First_Order_k * (*angle2 + (-gyro2 / GYRO_K) * Delta_t) + (1 - First_Order_k) * (atan2(acc1, acc3) * 180 / PI);
	return *angle2;
} 

#define Second_Order_Filter_k 5

float Second_Order_Filter_Calc(int16_t acc1, int16_t acc3, int16_t gyro2, Second_Order_Filter* filter)
{
    
    
	float angle_m = atan2(acc1, acc3) * 180 / PI;
	float gyro_m = -gyro2 / GYRO_K;
	float x1, x2;
    x1 = (angle_m - filter->angle) * Second_Order_Filter_k * Second_Order_Filter_k;
    filter->y = filter->y + x1 * Delta_t;
    x2 = filter->y + 2 * Second_Order_Filter_k * (angle_m - filter->angle) + gyro_m;
    filter->angle = filter->angle + x2 * Delta_t;
	return filter->angle;
}

#define Q_angle	0.05	
#define Q_gyro	0.0003	
#define R_angle 0.01	

float MPU_Kalman_Filter_Calc(int16_t acc1, int16_t acc3, int16_t gyro2, MPU_Kalman_Filter* filter)
{
    
    
	float newAngle = atan2(acc1, acc3) * 180 / PI;
	float newRate = -gyro2 / GYRO_K;
	float E;
	float K_0, K_1;
	float Angle_err_x;

    filter->angle += Delta_t * (newRate - filter->Q_bias_x);
    filter->P_00 +=  - Delta_t * (filter->P_10 + filter->P_01) + Q_angle * Delta_t;
    filter->P_01 +=  - Delta_t * filter->P_11;
    filter->P_10 +=  - Delta_t * filter->P_11;
    filter->P_11 +=  + Q_gyro * Delta_t;

    Angle_err_x = newAngle - filter->angle;
    E = filter->P_00 + R_angle;
    K_0 = filter->P_00 / E;
    K_1 = filter->P_10 / E;

    filter->angle +=  K_0 * Angle_err_x;
    filter->Q_bias_x  +=  K_1 * Angle_err_x;
    filter->P_00 -= K_0 * filter->P_00;
    filter->P_01 -= K_0 * filter->P_01;
    filter->P_10 -= K_1 * filter->P_00;
    filter->P_11 -= K_1 * filter->P_01;

    return filter->angle;
}

MPU6050_Filter.h

#ifndef MPU6050_Filter_H_
#define MPU6050_Filter_H_

typedef struct
{
    
    
	float y;
	float angle;
}Second_Order_Filter;

typedef struct
{
    
    
	float P_00, P_01, P_10, P_11;
	float Q_bias_x;
	float angle;
}MPU_Kalman_Filter;

void MPU6050_Filter_Init(float loop_ms);
float First_Order_Filter_Calc(int16_t acc1, int16_t acc3, int16_t gyro2, float * angle2);
float Second_Order_Filter_Calc(int16_t acc1, int16_t acc3, int16_t gyro2, Second_Order_Filter* filter);
float MPU_Kalman_Filter_Calc(int16_t acc1, int16_t acc3, int16_t gyro2, MPU_Kalman_Filter* filter);

#endif

使用方法

       先调用MPU6050_Filter_Init(dt)，参数为一次循环的时间，单位为ms
       再使用滤波函数。

测试程序

       生成的程序较大，对于89C52，需要注释掉没用到的函数。

一阶互补滤波

#include <STC89C5xRC.H>
#include "intrins.h"
#include "stdint.h"
#include "USART.h"
#include "./MPU6050/MPU6050.h"
#include "./MPU6050/MPU6050_Filter.h"

void Delay1ms()		//@11.0592MHz
{
    
    
	unsigned char i, j;

	_nop_();
	i = 2;
	j = 199;
	do
	{
    
    
		while (--j);
	} while (--i);
}

void Delay_ms(int i)
{
    
    
	while(i--)
		Delay1ms();
}

void main(void)
{
    
    
	int16_t aacx,aacy,aacz;		//加速度传感器原始数据
	int16_t gyrox,gyroy,gyroz;	//陀螺仪原始数据
	
	float anglex = 0;
	float angley = 0;
	float anglez = 0;

	USART_Init(USART_MODE_1, Rx_ENABLE, STC_USART_Priority_Lowest, 11059200, 57600, DOUBLE_BAUD_ENABLE, USART_TIMER_1);
	MPU_Init(); 
	
	MPU6050_Filter_Init(47);
	
	while(1)
	{
    
    	
		MPU_Get_Accelerometer(&aacx, &aacy, &aacz);	//得到加速度传感器数据
		MPU_Get_Gyroscope(&gyrox, &gyroy, &gyroz);	//得到陀螺仪数据
		
		printf("%f, " , First_Order_Filter(aacy, aacz, gyrox, &anglex));
		printf("%f, " , First_Order_Filter(aacx, aacz, gyroy, &angley));
		printf("%f\r\n",First_Order_Filter(aacx, aacy, gyroz, &anglez));
	}
}

效果

       只看了俯仰和滚转
       First_Order_Filter_Tau 要根据需要调节，我这里取First_Order_Filter_Tau = 0.075
在这里插入图片描述
在这里插入图片描述

二阶互补滤波

#include <STC89C5xRC.H>
#include "intrins.h"
#include "stdint.h"
#include "USART.h"
#include "./MPU6050/MPU6050.h"
#include "./MPU6050/MPU6050_Filter.h"

void Delay1ms()		//@11.0592MHz
{
    
    
	unsigned char i, j;

	_nop_();
	i = 2;
	j = 199;
	do
	{
    
    
		while (--j);
	} while (--i);
}

void Delay_ms(int i)
{
    
    
	while(i--)
		Delay1ms();
}

Second_Order_Filter anglex = {
    
    0, 0}, angley = {
    
    0, 0}, anglez = {
    
    0, 0};

void main(void)
{
    
    
	int16_t aacx,aacy,aacz;		//加速度传感器原始数据
	int16_t gyrox,gyroy,gyroz;	//陀螺仪原始数据

	USART_Init(USART_MODE_1, Rx_ENABLE, STC_USART_Priority_Lowest, 11059200, 57600, DOUBLE_BAUD_ENABLE, USART_TIMER_1);
	MPU_Init(); 
	MPU6050_Filter_Init(56);

	while(1)
	{
    
    	
		MPU_Get_Accelerometer(&aacx, &aacy, &aacz);	//得到加速度传感器数据
		MPU_Get_Gyroscope(&gyrox, &gyroy, &gyroz);	//得到陀螺仪数据
		printf("%f, " , Second_Order_Filter_Calc(aacy, aacz, gyrox, &anglex));
		printf("%f, " , Second_Order_Filter_Calc(aacx, aacz, gyroy, &angley));
		printf("%f\r\n",Second_Order_Filter_Calc(aacx, aacy, gyroz, &anglez));
	}
}

效果

       只看了俯仰和滚转
       Second_Order_Filter_k根据需要，越大跟随越快，越小越平滑
       （我参考的大佬有取0.8的，有取10的，我这里取5）。
       要根据需要调节。
在这里插入图片描述

卡尔曼滤波

#include <STC89C5xRC.H>
#include "intrins.h"
#include "stdint.h"
#include "USART.h"
#include "./MPU6050/MPU6050.h"
#include "./MPU6050/MPU6050_Filter.h"

void Delay1ms()		//@11.0592MHz
{
    
    
	unsigned char i, j;

	_nop_();
	i = 2;
	j = 199;
	do
	{
    
    
		while (--j);
	} while (--i);
}

void Delay_ms(int i)
{
    
    
	while(i--)
		Delay1ms();
}

MPU_Kalman_Filter anglex = {
    
    0};
MPU_Kalman_Filter angley = {
    
    0};
MPU_Kalman_Filter anglez = {
    
    0};

void main(void)
{
    
    
	int16_t aacx,aacy,aacz;		//加速度传感器原始数据
	int16_t gyrox,gyroy,gyroz;	//陀螺仪原始数据

	USART_Init(USART_MODE_1, Rx_ENABLE, STC_USART_Priority_Lowest, 11059200, 57600, DOUBLE_BAUD_ENABLE, USART_TIMER_1);
	MPU_Init(); 
	MPU6050_Filter_Init(76);

	while(1)
	{
    
    	
		MPU_Get_Accelerometer(&aacx, &aacy, &aacz);	//得到加速度传感器数据
		MPU_Get_Gyroscope(&gyrox, &gyroy, &gyroz);	//得到陀螺仪数据
		printf("%f, " , MPU_Kalman_Filter_Calc(aacy, aacz, gyrox, &anglex));
		printf("%f, " , MPU_Kalman_Filter_Calc(aacx, aacz, gyroy, &angley));
		printf("%f\r\n",MPU_Kalman_Filter_Calc(aacx, aacy, gyroz, &anglez));
	}
}

效果

       只看了俯仰和滚转
       Q参数:过程噪声协方差 Q参数调滤波后的曲线平滑程度，Q越小越平滑;
       R参数:观测噪声协方差 R参数调整滤波后的曲线与实测曲线的相近程度，R越小越接近(收敛越快)
       我参考的大佬有取0.01，0.0003，0.01的，也有取0.001，0.005，0.5的
       我这里取
       Q_angle=0.05
       Q_gyro=0.0003
       R_angle=0.01
       要根据需要调节。
在这里插入图片描述

总结

       由于每种滤波器的参数都会极大地影响该滤波器的性能（一阶滤波、二阶滤波各一个参数，卡尔曼滤波三个参数），因此难以互相比较，我建议根据单片机的资源、性能选择要用的滤波器，调参时配合上位机观察立方体的效果和对应波形。

Guess you like

Origin blog.csdn.net/weixin_44457994/article/details/121550863
Recommended
Face Wall Intelligence releases the Eurux-8x22B open source large model - it can be called the "science champion"
Kaiyuan Daily | Google supports Hongmeng to take over; open source Rabbit R1; Android phones supported by Docker; Microsoft’s anxiety and ambition; Haier Electric shuts down the open platform
Ranking
Jianzhi offer interview questions 68-II. The nearest common ancestor of a binary tree (recursive)
jQuery Mobile development 1-UI components
Summary of Kotlin function knowledge
[ZZ] The Naked Truth About Anisotropic Filtering
Diagnosis: record a recovery of abnormal CRASH storage caused the database to be unable to be opened normally
Redis introduction and Linux installation Redis
Experiment 2 Introduction to switches
glances open source command-line system monitoring tools introduced
Use of selector
vue3 handwriting a carousel picture
Daily
More
2024-05-06(6)
2024-05-05(0)
2024-05-04(18)
2024-05-03(8)
2024-05-02(0)
2024-05-01(4)
2024-04-30(36)
2024-04-29(5)
2024-04-28(12)
2024-04-27(29)

Code World

© 2018 codetd.com