【Problem Description】
When the card is tested, jump directly to the local package of the quick app, and cannot jump to the online quick app.
Access plan : card type
Traffic entrance : scene intelligence & intelligent search
Quick Service Assistant version : version 2.4.0
【Cause Analysis】
There are two ways to open Quick Service Assistant during testing, namely Quick Application Center Jump and Quick Application Loader Jump. Use the quick application center to jump to the online quick application; use the quick application loader to jump to the mobile phone's local quick application package (used for quick application self-test verification before card submission).
When using the Quick Service Assistant to do a card test, you cannot jump to the online Quick App. The reasons may be as follows:
-
The card jump protocol is written as "hap://app/", and the assistant only supports the jump fast app loader to open the local fast app package.
-
The card jump protocol is written as "hwfastapp://", you can choose to jump to the fast application center or the fast application loader, but you mistakenly choose to open it with the fast application loader.
【solution】
-
First go to the application market to search for "Quick Service Assistant" to download the latest version of the assistant, and install the quick application loader according to the assistant's instructions.
-
If the test needs to jump to the online fast application, please replace "hap://app/" in the card jump protocol with "hwfastapp://" and retest. If the assistant has selected the default opening method before, please check whether the fast application loader has been selected as the default through "Settings"-"Applications"-"Application Management"-"Search Quick Application Center or Quick Application Loader" Open mode, if yes, clear the selection and retest.
-
Select Quick Application Center to open.
-
Before all card tests, try to open the assistant to clear the test buffer to avoid jumping to previous test records
[Experience summary]
In the quick service card test, if you need to use the assistant to do the simulation test, if the card jump protocol is written "hap://app/", then the assistant only supports jumping to the local quick application package, if you need to jump to the line For the above, you need to replace "hap://app/" with "hwfastapp://" and retest; if the jump protocol has been written "hwfastapp://", check whether the default large development mode is turned on, and clear it Then select the desired opening method.
Card-type quick service service test guide: https://developer.huawei.com/consumer/cn/doc/distribution/service/5060433
Original link: https://developer.huawei.com/consumer/cn/forum/topicview?tid=0202337384010540300&fid=17
Author: Utopian Communist