.Does everyone really understand its features?
The rope displacement sensor is a long-distance ranging sensor. An important advantage is that it is convenient to send the signal directly into the computer system. It is widely used in linear measurement systems, hydraulic control systems, telescopic devices, storage positioning devices, textile machinery, packaging equipment, printing equipment, construction lifting platforms and other related size measurement and position control, especially suitable for microcomputer control of the displacement of hydraulic universal testing machines measuring. The range of the sensor can be customized from 500mm to 50000mm, the ranging range is large, the pull-wire sensor is small in appearance, easy to install, and light in overall weight, which meets the needs of most customers. Today I will share with you the functional characteristics of this type of sensor: Do
you really understand the functional characteristics of the rope displacement sensor?
1. There are many types of displacement sensors, and the measurement accuracy, service life, response frequency and applicable occasions of sensor products designed with different principles will be slightly different. Appropriate displacement sensor products should be selected according to site installation and measurement requirements.
2. The measurement range of the displacement sensor has a certain range. Using over-travel will cause the sensor to fail to output real data, and it may damage the sensor in severe cases. When purchasing or customizing displacement sensor products, you should choose a suitable range. Some products can leave a certain margin to facilitate sensor installation and use.
3. During the installation and use of the displacement sensor, try to avoid direct sunlight, high and low temperature areas, vibration or severe impact platforms, or occasions where corrosive media exists, to prevent the sensor from affecting the detection and conversion data or product life.
4. Displacement sensor signal transmission cables cannot share wiring ducts or wiring ducts with equipment power lines and power lines. The cables should use shielded wires with outstanding anti-interference performance. The installation and use of the sensor should avoid radio frequency signal sources, high-power electrical or other equipment with noise interference to prevent the sensor output signal from being affected.
5. Under normal circumstances, the transmission cable of the displacement sensor should not be too long, especially the long-distance transmission of analog voltage signal output will cause signal attenuation and seriously affect the quality of signal transmission. For long-distance transmission of sensor data, analog current signal or digital signal should be preferred.
6. After some types of displacement sensors are powered on, they need to wait for a certain period of time to collect normally.
In summary, the functional characteristics of the rope displacement sensor introduced by the editor. I don’t know if you can understand it. If you don’t understand, you can consult the editor or technicians. I look forward to your attention!