How to solve the problems in the various systems of the rope displacement sensor?
Different types of rope displacement sensors and different output signals will lead to different cable outlet methods. Mechanical equipment commonly used displacement sensor analog signal output, this kind of signal has three-wire voltage output, two-wire current output and three-wire current output. Then there is a problem with its system in the process of work, which way should be started? ? Today I will share with you:
1. The transmission cables of the sensing system and the power system, the oil circuit of the hydraulic system (or the air pipe of the pneumatic system) are also components that are relatively easily damaged. Pay attention to the protection and inspection of these components during daily operations and equipment maintenance. If there is a line When it is damaged or the oil circuit is blocked, it should be replaced in time to solve it.
2. Mechanical equipment control system and software failures are also problems that may be encountered in industrial production, which include the aging and failure of the control system hardware system, and the failure of the software system. Generally, for system failures caused by aging hardware facilities, short circuits, poor contact, etc., a new controller should be replaced in time. Software problems are solved by conventional means such as restarting, system upgrading, and system optimization.
3. Check whether the sensor system parameter settings are abnormal. Due to operator errors, the sensor system parameters may be set improperly, such as excessive displacement measurement deviation caused by incorrect displacement sensor parameter setting, and inaccurate position positioning. For the long-term use of the sensor system, such as sensor aging and sensor circuit joint loosening, technicians should be arranged in time to replace new electronic components. The
above three points are sufficient to explain the system problem of the rope displacement sensor. If there is a system problem, you should not understand it at any time. Consult the editor, welcome your attention!