Rotary joints are part of slip rings. Many people may not know how to distinguish rotary joints. Rotary joints can be classified according to different needs and uses. For loop rotary joints, it is mainly based on the working situation to choose some more suitable connection methods. Including some working conditions, both the sealing surface and the sealing ring are made of special materials, which can make the life longer, because there will be very precise bearings inside the rotating interface. Because the operation of this product is very stable, durable, firm and flexible, it can perform high-speed operation.
The MK11A series is a single-channel electrical rotary joint with a maximum speed of 600RPM. It can transmit compressed air separately, vacuum negative pressure, and also transmit power signals at the same time. It has 1 inlet and 1 outlet, compressible air, vacuum, etc., With G1/8" teeth; compact structure, light weight, corrosion resistance, stainless steel shaft and aluminum shell.
MK21 series 2 inputs and 2 outputs, 2 channels air/pneumatic and electric integrated rotary joint, pneumatic high-speed rotary joint, with G1/8" thread; and optional simultaneous power line, signal line, industrial bus, control line, solenoid valve, Induction wire, etc.; the standard is flange installation.
MK41 series 4 inputs and 4 outputs, 4 channels air/pneumatic combined rotary joint, pneumatic slip ring, rotary air joint, with G1/8" thread; and optional power line, signal line, industrial bus, control line, Solenoid valves, induction wires, etc.; pneumatic slip rings and rotary air joints are standard for flange installation.
The MK81 series is a rotary joint with 8 inputs and 8 outputs, 8 gas, vacuum, gas and electric hybrid slip rings, with G1/8" teeth.
MK121 series is a 12-way pneumatic rotary joint, 12 in and 12 out, compressed air, vacuum, etc., with G1/8" teeth; working life is more than 10 million revolutions.
MK161 series is a 16-way air slip ring, 16-in and 16-out electrical rotary joint, which can be combined with electric power, with G1/8" thread; and can optionally pass power line, signal line, industrial bus, control line, solenoid valve, induction line at the same time Wait.
MK241 series is a 24-way air slip ring with 24 inlet and 24 outlet electric rotary joints, which can be combined with electricity, with G1/8" teeth; it can be adapted to 6~8mm trachea, 10A and signal (5A) can be combined at will.