Postgresql 主从配置方法

其他 2018-12-04 09:00:56 阅读次数: 0

1、安装环境

[root@pg_master ~]# cat /etc/redhat-release
CentOS release 6.8 (Final)

主IP: hostname:pg_master ip:192.168.109.232
从IP: hostname:pg_standby ip:192.168.109.233
关闭防火墙： service iptables status
service iptables stop
2、主从节点安装Postgresql
只显示在主节点安装的信息，从节点操作一致
下载安装：

[root@pg_master ~]# yum install -y https://download.postgresql.org/pub/repos/yum/9.6/redhat/rhel-6.8-x86_64/pgdg-centos96-9.6-3.noarch.rpm

**************安装下载信息，成功后显示如下***********************
Total size: 2.7 k
Installed size: 2.7 k
Downloading Packages:
Running rpm_check_debug
Running Transaction Test
Transaction Test Succeeded
Running Transaction
Warning: RPMDB altered outside of yum.
  Installing : pgdg-centos96-9.6-3.noarch                                                              1/1 
  Verifying  : pgdg-centos96-9.6-3.noarch                                                              1/1 

Installed:
  pgdg-centos96.noarch 0:9.6-3                                                                             

Complete!

创建用户组并安装客户端：

[root@pg_master ~]# groupadd postgres
[root@pg_master ~]# useradd -g postgres postgres
[root@pg_master ~]# passwd postgres
Changing password for user postgres.
New password: 
BAD PASSWORD: it is based on a dictionary word
Retype new password: 
passwd: all authentication tokens updated successfully.
[root@pg_master ~]# yum install postgresql96

*********************下载安装信息，成功后显示如下******************************
Total download size: 1.7 M
Installed size: 8.4 M
Is this ok [y/N]: y
Downloading Packages:
(1/2): postgresql96-9.6.10-1PGDG.rhel6.x86_64.rpm                                   | 1.4 MB     00:03     
(2/2): postgresql96-libs-9.6.10-1PGDG.rhel6.x86_64.rpm                              | 289 kB     00:00     
-----------------------------------------------------------------------------------------------------------
Total                                                                      268 kB/s | 1.7 MB     00:06     
Running rpm_check_debug
Running Transaction Test
Transaction Test Succeeded
Running Transaction
  Installing : postgresql96-libs-9.6.10-1PGDG.rhel6.x86_64                                             1/2 
  Installing : postgresql96-9.6.10-1PGDG.rhel6.x86_64                                                  2/2 
  Verifying  : postgresql96-libs-9.6.10-1PGDG.rhel6.x86_64                                             1/2 
  Verifying  : postgresql96-9.6.10-1PGDG.rhel6.x86_64                                                  2/2 

Installed:
  postgresql96.x86_64 0:9.6.10-1PGDG.rhel6                                                                 

Dependency Installed:
  postgresql96-libs.x86_64 0:9.6.10-1PGDG.rhel6                                                            

Complete!

安装服务器

[root@pg_master ~]# yum install postgresql96-server
Total download size: 5.0 M
Installed size: 19 M
Is this ok [y/N]: y
Downloading Packages:
postgresql96-server-9.6.10-1PGDG.rhel6.x86_64.rpm                                   | 5.0 MB     00:06     
Running rpm_check_debug
Running Transaction Test
Transaction Test Succeeded
Running Transaction
  Installing : postgresql96-server-9.6.10-1PGDG.rhel6.x86_64                                           1/1 
  Verifying  : postgresql96-server-9.6.10-1PGDG.rhel6.x86_64                                           1/1 

Installed:
  postgresql96-server.x86_64 0:9.6.10-1PGDG.rhel6                                                          

Complete!

初始化数据库并启动数据

[root@pg_master ~]# service postgresql-9.6 initdb
Initializing database:                                     [  OK  ]
[root@pg_master ~]# chkconfig postgresql-9.6 on
[root@pg_master ~]# service postgresql-9.6 start
Starting postgresql-9.6 service:                           [  OK  ]

目前为止主从节点postgresql安装完毕！(从节点同样按上述步骤进行)

3、主从配置
主节点配置：

[root@pg_master ~]# su - postgres
[postgres@pg_master ~]$ psql
psql (9.6.10)
Type "help" for help.

--用户名密码可自行根据情况配置
postgres=# create role repl(用户名) login replication encrypted password 'passwd'(密码);
--配置pg_hba.conf文件
postgres=# \q
[postgres@pg_master ~]$ vi /var/lib/pgsql/9.6/data/pg_hba.conf
--新增如下配置
# TYPE  DATABASE        USER            ADDRESS                 METHOD
host    replication     repl            192.168.109.0/24        md5
host    all             repl            192.168.109.0/24        trust
host    all             all             0.0.0.0/0               md5
--配置postgresql.conf文件
[postgres@pg_master ~]$ vi /var/lib/pgsql/9.6/data/postgresql.conf
# - Connection Settings -
listen_addresses = '*'  #允许所有端口访问(可自行设置ip)# what IP address(es) to listen on;
                                        # comma-separated list of addresses;
                                        # defaults to 'localhost'; use '*' for all
                                        # (change requires restart)
#port = 5432                            # (change requires restart)

max_connections =512   #从库的 max_connections要大于主库  (change requires restart)
wal_level = hot_standby  #热备模式
max_wal_senders= 6 #可以设置最多几个流复制链接，差不多有几个从，就设置多少
wal_keep_segments = 10240  #重要配置
wal_sender_timeout = 60s  #有些是wal_send_timeout，稍微注意下
archive_mode = on #允许归档
archive_command = 'cp %p /var/lib/pgsql/9.6/data/pg_archive/%f' #根据实际情况设置
--建立归档文件和日志文件
[postgres@pg_master ~]$ mkdir /var/lib/pgsql/9.6/data/pg_archive
[postgres@pg_master ~]$ chown -R postgres.postgres /var/lib/pgsql/9.6/data/pg_archive
[postgres@pg_master ~]$ mkdir /var/log/pgsql-log
[postgres@pg_master ~]$ chown -R postgres.postgres /var/log/pgsql-log
[postgres@pg_master ~]$ service postgresql-9.6 restart

从节点配置：

--同步
[root@pg_standby ~]# su - postgres
[postgres@pg_standby ~]$ rm -rf /var/lib/pgsql/9.6/data/*
[postgres@pg_standby ~]$ pg_basebackup -h 192.168.109.232 -U repl -D /var/lib/pgsql/9.6/data -X stream -P
--修改配置文件
[postgres@pg_standby ~]$ cp /usr/pgsql-9.6/share/recovery.conf.sample /var/lib/pgsql/9.6/data/recovery.conf
[postgres@pg_standby ~]$ vi /var/lib/pgsql/9.6/data/recovery.conf
--增加以下几行
standby_mode = on
primary_conninfo = 'host=192.168.109.232 port=5432 user=repl password=passwd'
trigger_file = '/var/lib/pgsql/9.6/data/trigger.kenyon'
recovery_target_timeline = 'latest'
[postgres@pg_standby ~]$ vi /var/lib/pgsql/9.6/data/postgresql.conf
# - Connection Settings -

listen_addresses = '*'  ##允许所有端口访问(可自行设置ip) what IP address(es) to listen on;
                                        # comma-separated list of addresses;
                                        # defaults to 'localhost'; use '*' for all
                                        # (change requires restart)
#port = 5432                            # (change requires restart)

max_connections =1024  # #从库的 max_connections要大于主库(change requires restart)
wal_level = hot_standby  #热备模式
hot_standby = on #说明这台机器不仅仅用于数据归档，也用于查询
max_standby_streaming_delay = 30s
wal_receiver_status_interval = 10s #多久向主报告一次从的状态。
hot_standby_feedback = on #如果有错误的数据复制，是否向主进行范例
--重启
[postgres@pg_standby ~]$ service postgresql-9.6 restart

4、主从配置情况检验

--主库查看
[root@pg_master ~]# su - postgres
[postgres@pg_master ~]$ psql
psql (9.6.10)
Type "help" for help.

postgres=# select client_addr,sync_state from pg_stat_replication;
   client_addr   | sync_state 
-----------------+------------
 192.168.109.233 | async
(1 row)

postgres=# select * from pg_stat_replication;
 pid  | usesysid | usename | application_name |   client_addr   | client_hostname | client_port |         b
ackend_start         | backend_xmin |   state   | sent_location | write_location | flush_location | replay_
location | sync_priority | sync_state 
------+----------+---------+------------------+-----------------+-----------------+-------------+----------
---------------------+--------------+-----------+---------------+----------------+----------------+--------
---------+---------------+------------
 4777 |    16384 | repl    | walreceiver      | 192.168.109.233 |                 |       42860 | 2018-09-1
1 14:17:17.697104+08 |         1680 | streaming | 0/4016BA0     | 0/4016BA0      | 0/4016BA0      | 0/4016B
A0       |             0 | async
(1 row)
--主库创建一个数据库
postgres=# create database test;
CREATE DATABASE
postgres=# \l     //  查看当前所有数据库
                                  List of databases
   Name    |  Owner   | Encoding |   Collate   |    Ctype    |   Access privileges   
-----------+----------+----------+-------------+-------------+-----------------------
 postgres  | postgres | UTF8     | en_US.UTF-8 | en_US.UTF-8 | =Tc/postgres         +
           |          |          |             |             | postgres=CTc/postgres
 template0 | postgres | UTF8     | en_US.UTF-8 | en_US.UTF-8 | =c/postgres          +
           |          |          |             |             | postgres=CTc/postgres
 template1 | postgres | UTF8     | en_US.UTF-8 | en_US.UTF-8 | =c/postgres          +
           |          |          |             |             | postgres=CTc/postgres
 test      | postgres | UTF8     | en_US.UTF-8 | en_US.UTF-8 | 
(4 rows)

--查看从库中是否已经同步
[postgres@pg_standby ~]$ psql
psql (9.6.10)
Type "help" for help.

postgres=# \l
                                  List of databases
   Name    |  Owner   | Encoding |   Collate   |    Ctype    |   Access privileges   
-----------+----------+----------+-------------+-------------+-----------------------
 postgres  | postgres | UTF8     | en_US.UTF-8 | en_US.UTF-8 | =Tc/postgres         +
           |          |          |             |             | postgres=CTc/postgres
 template0 | postgres | UTF8     | en_US.UTF-8 | en_US.UTF-8 | =c/postgres          +
           |          |          |             |             | postgres=CTc/postgres
 template1 | postgres | UTF8     | en_US.UTF-8 | en_US.UTF-8 | =c/postgres          +
           |          |          |             |             | postgres=CTc/postgres
 test      | postgres | UTF8     | en_US.UTF-8 | en_US.UTF-8 | 
(4 rows)

参考：https://blog.csdn.net/weixin_41048363/article/details/80310285
https://www.2cto.com/database/201712/704490.html

猜你喜欢

转载自blog.csdn.net/qq_42189083/article/details/82627372
今日推荐
开放签电子签章：停止新增，优化体验，前进更进（五一假期前工作）
开源日报 | 中学生开源前端动画引擎；全球首个Llama3 8B中文版开源模型；联想电脑恐出局；Linus讽刺AI炒作
“百模大战”必有一战 | 2024中国“百模大战”竞争格局分析
最强开源大模型 Llama 3 上架 Gitee AI
虽然老乡鸡开源的不是代码，但背后的原因却让人很暖心
富文本编辑器 Quill 2.0 重磅发布，特性、可靠性与开发者体验大幅提升
周排行
使用Redis中间件解决商品秒杀活动中出现的超卖问题（使用Java多线程模拟高并发环境）
野指针及c++指针使用注意点
redis 3.0　新特性
(翻译)火狐操作系统javascript API
微信小程序开发入门
mysql数据查询之五子句(where、group by、having、order by和limit)
Codeforces Round #517 Div. 1翻车记
在caffe 中实现Generative Adversarial Nets（二）
企业级漏洞扫描工具
java byte数组与String互转
每日归档
更多
2024-04-23(26)
2024-04-22(39)
2024-04-21(0)
2024-04-20(6)
2024-04-19(5)
2024-04-18(0)
2024-04-17(5)
2024-04-16(70)
2024-04-15(42)
2024-04-14(0)

代码天地 © 2018 codetd.com

境外服务器   最新电视剧2022